102 Track and Hanger Sets Sliding Devices

■ Self-contained – Each set consists of
a track box and cover, door hanger
with adjustable rollers for leveling,
door guide and door guide angle.
■ Heavy housing construction –
10-gauge steel with cold-finished steel
■ Sloped-top housing – 10-gauge steel,
sloped to prevent hiding of
■ Corrosion-resistance – Working parts
resist rust and corrosion.
■ Tamper-resistance – Cover provided
with tamper-resistant screws.
■ Adjustable door rollers – Eccentric
bushings permit adjustment to level
the door.
■ Smooth operation – Door rollers
3-3/4″ x 1″ thick, zinc plated steel
with sealed, anti-friction bearings.
■ Adjustable door stop – Steel block
attached to track with setscrews.
■ Non-handed – Reversible for doors
sliding to right or left.
■ Finish – USP Primed for painting.
■ Rubber bumper – Attached to
doorstop, cushions door in the open
position to reduce noise.

SKU: 102 Category:


Track and hanger sets are overhead
supporting devices for manuallyoperated
sliding doors ranging in width
from 2’0″ to 3’6″ up to a maximum
weight of 350 pounds.
Track and hanger sets may be used for
cell or corridor doors on grille, masonry
or plate wall construction. Three
standard housing sizes suit most door
sizes and applications. Specify type of
wall for guide mounting.

© 2017, Best Brothers Group. All rights reserved.


Folger Adam

Optional Features

Indication switch – An internal switch
monitors position of the door
indicating either open or closed
status. Add suffix “L” when ordering.
■ Door starter – A spring-loaded
plunger to push a door slightly open
after unlocking. Used with remote
controlled electric locks or mechanical
locks to move door open once
unlocked. Add suffix “S” when
■ Custom sizes – Sets may be
constructed for wider and heavier
doors. Consult the factory with your
specific application.
■ Continuous housing – Sets may be
built to suit the width of a group of
cells and may contain a wire tray for
cell line cable connecting locks to a
common point at the end of a cell

■ Door receivers or electric lock
columns – Receivers may be supplied
to capture the front edge of the door.
Lock columns provide a method of
mounting a lock, protecting the wiring
and installing the door receiver.

© 2017, Best Brothers Group. All rights reserved.

Electrical Characteristics

(Indication switch)
Single-pole, double-throw (SPDT),
15 amps @ 125 or 250 VDC.

© 2017, Best Brothers Group. All rights reserved.