The Bypass Automatic Door System is a cost-effective automatic exit and entrance door in one compact package. To direct traffic flow, the right sliding panel is used exclusively for ingress while the left sliding panel is exclusively used for egress. Between the two sliding panels is a shared stationary panel. This simple design provides a large entrance and exit for heavy pedestrian traffic in applications where rough opening space is restricted.

FEATURES AND BENEFITS

  • Two independently controlled moving panels, one for entering and the other for exiting
  • In a 16 rough opening, a 12 Bypass offers the same clear door opening as two 8 single slides
  • Continuous header for both entry and exit that simplifies building design
  • Full breakout for emergency egress
  • Pressure rating of 70 psf
  • Utilizes the same major components used in the Dura-Glide family of automatic sliding door systems

All door packages are custom manufactured to fit your job requirements up to increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.

Category:
   

Description

The Bypass Automatic Door System is a cost-effective automatic exit and entrance door in one compact package. To direct traffic flow, the right sliding panel is used exclusively for ingress while the left sliding panel is exclusively used for egress. Between the two sliding panels is a shared stationary panel. This simple design provides a large entrance and exit for heavy pedestrian traffic in applications where rough opening space is restricted.

FEATURES AND BENEFITS

  • Two independently controlled moving panels, one for entering and the other for exiting
  • In a 16 rough opening, a 12 Bypass offers the same clear door opening as two 8 single slides
  • Continuous header for both entry and exit that simplifies building design
  • Full breakout for emergency egress
  • Pressure rating of 70 psf
  • Utilizes the same major components used in the Dura-Glide family of automatic sliding door systems

All door packages are custom manufactured to fit your job requirements up to increments. For sizes greater or smaller than typical, contact your authorized STANLEY Access Technologies Sales Representative.

DESIGN: Bypass
BREAKOUT: SX Entrance Panel (When Fully Closed); SX Exit Panel | OPTION: Full Breakout with FBO
FINISH: Clear or Dark Bronze Anodized | OPTION: Special Finishes Available
IMPACT DOOR PACKAGE SIZE: 122 Minimum Width, 168 Maximum Width, 7-8 Available Height
HEADER SIZE: 8 (203mm) High x 6 (152mm) Deep | 2 Packages Included for 12 Overall Depth
CLEAR DOOR OPENING:Entrance 36 – 48, Exit 33.5 – 45.5 |Full Break Out version 32.1 to 44.1
STILES: Narrow or Medium
BOTTOM RAIL: 4″ | OPTION: 6″, 8″, 10″ 12″
DOOR PANEL WEIGHT: Up to 220 Pounds Each (100kg)
POWER REQUIRED: 120 VAC, 50/60 HZ, 5 Amps Minimum | OPTION: Uninterrupted Power Supply
DRIVE SYSTEM: 1/4 HP DC Motor, Gear Drive, Toothed belt | OPTION: Twin 1/4 HP DC Gear Driven Motors
CONTROLS: Rocker Switch | OPTION: Rotary, Keyed Rotary Controls, Eco Pro
CONTROLLER: Microprocessor Based, Safety Logic
ACTIVATIONSENSORS: 2 for Motion (Switchable Between Uni-directional and Bi-directional) | OPTIONAL: Mats, Wallplates, Radio Control
SAFETY SENSORS: 1 Stan-Guard and Doorway Holding Beam for Safety
LOCKING: 1-, 2-, or 3-Point Locking
CAMERA OPTIONS: Jamb Camera
TEMPERATURE RATING: -30F to 130F
GLASS STOPS: 1/4″, 1/2″, 5/8″, 1″
THRESHOLD: Configurable Options
TRANSOM: Optional | Not available on FBO package
CODES AND STANDARDS: ANSI A156.10, NFPA 101, UL, cUL, IBC, ICBO, BOCA

*​All Specifications are subject to change. Please contact your local sales representative to ensure accuracy.

© 2017, . All rights reserved. On republishing this post you must provide link to original post.

Brand

STANLEY

Google URL Shortener:

https://goo.gl/G2fEpU

Comments are closed.