Features and Benefits
  • FN-Series: Narrow 1” (25mm) face provides a very slim appearance to the door opening
  • Die-mitered corner connection at the head and jamb insure an attractive, tight and closed mitered connection. The miter includes 4 corner tabs designed with concealed connection eliminating the need for continuous profile welding.
  • Patented universal hinge preparations allow for easy field conversion from standard weight .134” (3.3mm) thick hinges to heavy weight .180” (4.7mm) hinges
  • F-Series: Adjustable base anchors allow for installation adjustment when the floor is not level
  • Factory prepared for field installed silencers
  • Factory applied baked on rust inhibiting primer in accordance with ANSI A250.10-1998 (R2004)
Category:
   

Description

F-Series
F-Series 3 Sided Flush Frames are designed to meet requirements for light to maximum duty applications in both commercial and institutional buildings. They are installed in both interior and exterior locations, and in virtually all types of buildings and wall constructions. These frames are to be installed as part of the wall framing sequence. They can be specified and supplied as KD (knock-down) for field assembly prior to installation or welded for installation as a complete unit.
FN-Series
FN-Series 3 Sided Flush Narrow 1” (25mm) Face Frames are designed to meet requirements for light to extra heavy duty applications in both commercial and institutional buildings where a slim face profile is required. They are installed in both interior and exterior locations, and in virtually all types of buildings and wall constructions. These frames are to be installed as part of the wall framing sequence. They can be specified and supplied as KD (knock-down) for field assembly prior to installation or welded for installation as a complete unit.
Features and Benefits
  • FN-Series: Narrow 1” (25mm) face provides a very slim appearance to the door opening
  • Die-mitered corner connection at the head and jamb insure an attractive, tight and closed mitered connection. The miter includes 4 corner tabs designed with concealed connection eliminating the need for continuous profile welding.
  • Patented universal hinge preparations allow for easy field conversion from standard weight .134” (3.3mm) thick hinges to heavy weight .180” (4.7mm) hinges
  • F-Series: Adjustable base anchors allow for installation adjustment when the floor is not level
  • Factory prepared for field installed silencers
  • Factory applied baked on rust inhibiting primer in accordance with ANSI A250.10-1998 (R2004)

Specifications

  • Overall frame construction meets the requirements of ANSI A250.8-2003 (commonly referred to as SDI-100)
  • Hardware preparations and reinforcements are in accordance with ANSI A250.6-2003. Locations are in accordance with ANSI/DHI A115 unless otherwise stated
  • Meet the broadest fire rating requirements

© 2017, . All rights reserved. On republishing this post you must provide link to original post.

Brand

LCN

Google URL Shortener:

https://goo.gl/DExt3G

Comments are closed.