Floor Stops — Dome
FS13 Dome Stop
  • Standard FS13 for use where no threshold is used
  • Heavy-Duty Cast Dome Stops constructed of brass
  • Unique riser design of R14 (below) allows easy conversion to threshold application
  • Units are packed with fasteners sufficient for mounting in all types of floor construction, including concrete
  • Replaceable grey rubber bumper
Category:
   

Description

Floor Stops — Dome
FS13 Dome Stop
  • Standard FS13 for use where no threshold is used
  • Heavy-Duty Cast Dome Stops constructed of brass
  • Unique riser design of R14 (below) allows easy conversion to threshold application
  • Units are packed with fasteners sufficient for mounting in all types of floor construction, including concrete
  • Replaceable grey rubber bumper

FS17 Dome Stop

  • One piece dome stop for use with thresholds
  • Heavy-Duty Cast Dome Stops constructed of brass
  • Units are packed with fasteners sufficient for mounting in all types of floor construction, including concrete
  • Replaceable grey rubber bumper

FS436 and FS438 Dome Stop

  • FS436 for doors without threshold
  • FS438 for doors with threshold or undercut doors
  • Heavy-Duty Cast Dome Stops constructed of brass, bronze or aluminum
  • Packed with wood screw and plastic anchor.
  • Replaceable gray, non-marring rubber bumper.

R435 Riser for FS436 Dome Stop
R437 Riser for FS438 Dome Stop

  • Extruded aluminum, mill finish
  • R435 for conversion of FS436 Dome Stop to carpet installation
  • R437 For conversion of FS438 Dome Stop to carpet installation
  • Packed with wood screws, lead shield and stud. Specify Tampin (TPN) if required.

Floor Stops
FS18S and FS18L Floor Stops

  • Security Door Stops designed for use in high vandalism areas
  • Molded from black flame resistant, resilient material around a heavy-duty stud
  • Once grouted in concrete, leaves no exposed fasteners to be tampered with or removed
  • Ideal for jail or security cell areas where floor mounted stops are required
  • FS18L also ideal for concrete wall applications

FS434 Floor Stop

  • Burnished wrought steel
  • For undercut doors up to 1 1/2″
  • Packed with screws and plastic anchors
  • Replaceable soft, resilient gray rubber

430 Floor Door Stop

  • Burnished wrought steel
  • For undercut doors up to 1 1/2″
  • Packed with screws and plastic anchors
  • Replaceable soft, resilient gray rubber

FS441 Floor Stop

  • Accommodates door undercut up to 1 1/2″
  • Designed to blend well with all types of construction and provide a minimum of hindrance to cleaning efforts
  • Heavy-Duty cast brass or aluminum construction
  • Replaceable Non-marring rubber bumper
  • FS441 packed with expansion shield and tampin for masonry type mounting, and wood screws for drywall mounting

FS444 and FS448 Floor Stop

  • Ideal for interior or exterior use
  • Cast brass construction
  • Accommodates door undercut up to 2 1/2″
  • Replaceable Non-marring rubber tip
  • FS444 is packed with expansion shield and lead shield, for masonry type mounting. FS448 is packed with wood screws, for drywall mounting.

FS9 Floor Stop & Semi-Automatic Holder

  • Semi-automatic floor-mounted holders accommodates with door to floor clearance of 1 1/2″ or less
  • Cast from heavy-duty brass
  • Activate holder by flipping the engagement tongue forward. When door is opened, the hook (mounted on door) engages the tongue. To release, push firmly on door to disengage tongue.
  • Universal screw pack accommodates all types of floor and door construction

FS40, FS41, FS42, FS43 Floor Stop & Automatic Holder

  • Automatic door holders ideal for heavy-traffic situations that require a simple, fool-proof, Hold-Open device
  • Forged from brass
  • Unit is activated automatically when door is opened. A firm pull on door releases the mechanism.
  • Strikes accommodate different door to floor clearances
  • Model numbers are determined by strike/door-to-floor clearances
  • Holder position on door is adjustable
  • Universal screw pack allows for installation in all types of door construction

FS446 and FS450 Floor Stop & Manual Door Holder

  • Manual type floor holder ideal for interior or exterior use
  • Cast brass or aluminum construction
  • Accommodates door undercut up to 2 1/2″
  • Replaceable non-marring rubber tip
  • Unit functions as a stop but serves as a Hold-Open device when hook is manually engaged in strike. Unit requires manual disengagement to release Hold-Open.
  • FS446 packed with expansion shield and lead shield, for masonry type mounting
  • FS450 packed with 3 wood screws, for drywall mounting

FS495 Wall Stop & Automatic Holder
FS496 Floor Stop & Automatic Holder
FS497 Floor Stop & Automatic Holder

  • Automatic door holders ideal for heavy-traffic situations that require a simple, Hold-Open device
  • Cast brass construction
  • Recommended installation is holder on door and strike on wall
  • Holder position on door is adjustable
  • Holder is tapered to prevent “child riding”

© 2017, . All rights reserved. On republishing this post you must provide link to original post.

Brand

LCN

Google URL Shortener:

https://goo.gl/LAs8Zr

Comments are closed.