Features and Benefits
  • Mineral board core provides a 250°F (121°C) Temperature Rise rating or 450°C (232°C) at 30 minutes of test exposure, depending on hardware application
  • Full Height, Epoxy Filled Mechanical Interlock Edges provide structural support and stability the full height of the door edges. Available edge options:
    • Visible Edge Seam (standard) – full height, epoxy filled mechanical Interlocked edges
    • Filled Seam – optional edge seam epoxy filled and finished smooth. Includes tack welds above and below edge cutouts for hinges, locks, etc
    • Welded Edge Seam – optional edge seam welded with 1” (25mm) long weld, 6” (152mm) on center, epoxy filled between welds and finished smooth; available on T18, T16 and T14 doors
  • Universal Hinge Preparations (patented) allow for easy field conversion from standard weight .134” (3.3mm) hinges to heavy weight .180” (4.7mm) hinges
  • 14 Gage [0.067” (1.7mm)] Inverted Top and Bottom Channels provide stability and protection for the top and bottom edges from abuse
  • Beveled Hinge and Lock Edges allow for tighter installation tolerances, ensure easier operation and eliminate binding and sticking
  • Recessed Dezigner™ Glass Trim provides a clean, neat and flush finish with the door surface
  • Factory Applied Baked-On Rust Inhibiting Primer paint in accordance with ANSI A250.10-1998
Category:
   

Description

To meet application, specification and performance requirements, the T Series door offers a wide range of specifiable options including sizes, glass light designs, optional edge constructions and hardware (mechanical, pneumatic, electrical) preparations.
T-Series Doors are 1 3/4˝ (45mm) thick.
Features and Benefits
  • Mineral board core provides a 250°F (121°C) Temperature Rise rating or 450°C (232°C) at 30 minutes of test exposure, depending on hardware application
  • Full Height, Epoxy Filled Mechanical Interlock Edges provide structural support and stability the full height of the door edges. Available edge options:
    • Visible Edge Seam (standard) – full height, epoxy filled mechanical Interlocked edges
    • Filled Seam – optional edge seam epoxy filled and finished smooth. Includes tack welds above and below edge cutouts for hinges, locks, etc
    • Welded Edge Seam – optional edge seam welded with 1” (25mm) long weld, 6” (152mm) on center, epoxy filled between welds and finished smooth; available on T18, T16 and T14 doors
  • Universal Hinge Preparations (patented) allow for easy field conversion from standard weight .134” (3.3mm) hinges to heavy weight .180” (4.7mm) hinges
  • 14 Gage [0.067” (1.7mm)] Inverted Top and Bottom Channels provide stability and protection for the top and bottom edges from abuse
  • Beveled Hinge and Lock Edges allow for tighter installation tolerances, ensure easier operation and eliminate binding and sticking
  • Recessed Dezigner™ Glass Trim provides a clean, neat and flush finish with the door surface
  • Factory Applied Baked-On Rust Inhibiting Primer paint in accordance with ANSI A250.10-1998

Specifications

  • Door construction meets the requirements of ANSI A250.8-2003 (SDI 100)
  • Hardware preparations and reinforcements are in accordance with ANSI A250.6-2003. Locations are in accordance with ANSI/DHI A115 unless otherwise stated.
  • Meet the broadest fire rating requirements

© 2017, . All rights reserved. On republishing this post you must provide link to original post.

Brand

LCN

Google URL Shortener:

https://goo.gl/WJtBbe

Comments are closed.