Save Money with an Air to Air Heat Pump
Air to air heat pumps are the cheapest air source heat pumps that you can find in Toronto. If you want to save up to $1,500 and more per year on your heating bills, then an air to air heat pump deserves your attention. Not only will you be able to cut your monthly heating bills by 30% but you will also:
- Get up to 3 times higher heating efficiency.
- Easily navigate between heating and cooling.
- Able to apply for an extra subvention of $1405-2,365 a year.
Have you already decided on an air to air heat pump?
Fill in the form to receive up to four quotes on air to air heat pumps. We will give you a quick call and match you with relevant, local suppliers. Don’t worry, using BBG is free of charge, with no additional obligations connected to the service.
Price Example for an Air to Air Heat Pump
According to the Toronto’s Office for National Statistics, the size of an average household in Toronto is 2.3 people, living on an area of 96.8 square metres.
The installation cost of an air to air heat pump ranges from $9000 to $16000 for an average household, according to the Energy Saving Trust (EST). The running costs vary depending on many factors; such as the degree of insulation of the house or the desired room temperature.
The savings of an air to air heat pump are different depending on the heating system replaced. The EST states that, for an average household, the annual savings are:
- $295-425 if replacing gas (noncondensing)
- $715-1295 if replacing an electric heater (old storage heaters)
- $360-555 if replacing oil (noncondensing)
- $1200-1805 if replacing LPG (noncondensing)
- $525-875 if replacing coal
It is estimated that the average payback period for an air to air heat pump is 7 years. It should be noticed that this is just a theoretical value.
3 Reasons to Choose an Air to Air Heat Pump
Air to air heat pumps are thought to be the most effective in terms of the heat energy output per kWh of electricity they consume. A specific yield indicator known as COP is used to measure the efficiency rate of a heat pump. An air to air heat pump is able to generate up to 4.5 times the energy it consumes.
More benefits of hosting an air to air heat pump:
- It can easily be installed in a house with an existing conventional heating system. Your house does not need a hydronic heating system or additional intervention to the house.
- You will lower your electric power consumption rate by up to 50 percent. An air to air heat pump also has the shortest payback period of all types of heat pumps.
- Air to air heat pumps can easily be switched to cooling mode during the summer. Together with the built-in air filters, this will create a desirable micro climate in the room.
Read More: Choosing the Right Air to Air Heat Pump
Is an Air to Air Heat Pump the Best Solution for Me?
Can I have more than one inner block?
Yes, you can. In bigger houses, with multiple floors, it is common to install one inner block downstairs and one upstairs. It is important to strategically install the blocks so that the warm air easily can circulate between the rooms.
Does an air to air heat pump work below the freezing point?
Yes, they do. Most heat pumps are constructed to work functionally down to -15 °C. Regions that witness periods of subfreezing temperatures during winter combined with high humidity, might consider choosing a ground source heat pump.
This is due to the fact that air source heat pumps are weather-sensitive, in the sense that they absorb the outdoor air into the compressor of the heat pump. A ground source heat pump, on the other hand, generates solar heat that is stored in the ground.
Does an air to air heat pump make a lot of noise?
Air to air heat pumps have a moderate noise level that increases with size and age. This is why the outer block should preferably not be installed close to a neighbour’s patio. It might also be a good idea to install the inner block in an area that isn’t close to a bedroom. Most modern heat pumps have a low noise level, but the sound might be perceived differently from person to person.
How much time does it take to install the heat pump?
Less than a day. An air to air heat pump only needs a hole in the wall to connect the outer block with the inner block.
Service and Maintenance
Heat pumps require almost no maintenance. Though, you might want to have your certified installer to check the condition of the heat pump once a year. You might also want to clean or change the air filters in the inner block of the heat pump regularly.
When the outdoor temperature gets below freezing point, the air to air heat pumps could suffer from ice building on the outer block. During normal circumstances, the heat pump will automatically defrost. However, it might need some help. Make sure to turn off the heat pump before defrosting it.
Investing in a heat pump shelter spares your heat pump from harsh weather conditions, and prolong its lifespan. You can either buy a shelter or build it yourself. Another way to make sure your heat pump runs smoothly is to place it facing south in an area protected from the wind.
It is always recommended to consult your certified installer before servicing your air to air heat pump. Alternatively, you can check with your installer what kind of service agreement they provide.
Do You Want to Get Free Quotes on Air to Air Heat Pumps?
Finding the right heating solution for your property might be a hassle if you have to compare and check different suppliers. BBG is here to help! If you want to receive up to 4 quotes on the product of your choice, simply fill in the contact form on the top of this page. The service is totally free and at no obligation, and it takes only a minute!
© 2017 – 2018, Best Brothers Group. All rights reserved.